document number: 20035 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 02-dec-10 111 d/crcw e3 vishay lead (pb)-free thick film, rectangular chip resistors features ? stability r / r = 1 % for 1000 h at 70 c ? pure tin solder contacts on ni barrier layer provides compatibility with lead (pb)-free and lead containing soldering processes ? metal glaze on high quality ceramic ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition ? aec-q200 qualified, rev. c compliant notes ? these resistors do not feature a limited lifetime when operated wi thin the permissible limits. ho wever, resistance value drift increasing over operating time may result in exceeding a limi t acceptable to the specific application, thereby establ ishing a functional lifeti me. ? marking: see data sheet ?surface mount resistor marking? (document number 20020). ? power rating depends on the max. temperature at the solder poin t, the component placement density and the substrate material. standard electrical specifications model size rated disipation p 70 c w limiting element voltage u max. ac/dc temperature coefficient ppm/k tolerance % resistance range series inch metric crcw0201 0201 rr 0603m 0.05 30 100 1 47r to 1m0 e24; e96 200 1 5 10r to 1m0 e24; e96 e24 zero-ohm-resistor: r max.. = 50 m , i max. at 70 c = 1.0 a d10/crcw0402 0402 rr 1005m 0.063 50 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 1.5 a d11/crcw0603 0603 rr 1608m 0.10 75 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 2.0 a d12/crcw0805 0805 rr 2012m 0.125 150 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 2.5 a d25/crcw1206 1206 rr 3216m 0.25 200 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 3.5 a crcw1210 1210 rr 3225m 0.5 200 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 5.0 a crcw1218 1218 rr 3246m 1.0 200 100 200 1 5 1r0 to 2m2 e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 7.0 a crcw2010 2010 rr 5025m 0.75 400 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 6.0 a crcw2512 2512 rr 6332m 1.0 500 100 200 1 5 1r0 to 10m e24; e96 e24 zero-ohm-resistor: r max. = 20 m , i max. at 70 c = 7.0 a
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20035 112 revision: 02-dec-10 d/crcw e3 vishay lead (pb)-free thick film, rect angular chip resistors note (1) the power dissipation on the resistor gener ates a temperature rise against the lo cal ambient, depending on the heat flow suppor t of the printed-circuit board (thermal resistance). the rated dissipation applies only if the pe rmitted film temperature of 155 c is n ot exceeded. note (2) preferred way for ordering products is by use of the part number. technical specifications parameter unit crcw0201 d10/ crcw0402 d11/ crcw0603 d12/ crcw0805 d25/ crcw1206 crcw1210 crcw1218 crcw2010 crcw2512 rated dissipation p 70 (1) w 0.05 0.063 0.1 0.125 0.25 0.5 1.0 0.75 1.0 limiting element voltage u max. ac/dc v 30 50 75 150 200 200 200 400 500 insulation voltage u ins (1 min) v 50 > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 insulation resistance > 10 9 category temperature range c - 55 to + 155 failure rate h -1 1 x 10 -9 < 0.1 x 10 - 9 weight mg 0.17 0.65 2 5.5 10 16 29.5 25.5 40.5 part number and product description part number: crcw0603562rfkec (2) model value tolerance tcr packaging special crcw0201 crcw0402 crcw0603 crcw0805 crcw1206 crcw1210 crcw1218 crcw2010 crcw2512 r = decimal k = thousand m = million 0000 = jumper f = 1.0 % j = 5.0 % z = jumper k = 100 ppm/k n = 200 ppm/k 0 = jumper s = special ea, eb, ec, ed, ee, ef, eg, eh, ek up to 2 digits product description: d11/crcw0603 100 562r 1 % et6 e3 d11/crcw0603 100 562r 1 % et6 e3 model tcr resistance value tolerance pac k ag i n g lead (pb)-free crcw0201 d10/crcw0402 d11/crcw0603 d12/crcw0805 d25/crcw1206 crcw1210 crcw1218 crcw2010 crcw2512 200 ppm/k 100 ppm/k 10r = 10 562r = 562 10k = 10 k 1m = 1 m 0r0 = jumper 5 % 1 % et1, et5, et6, et7, ef4, e02, e67, e82, et9 e3 = pure tin termination finish c r c w 0 6 0 3 5 6 2 r f k e c
document number: 20035 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 02-dec-10 113 d/crcw e3 lead (pb)-free thick film, rectangular chip resistors vishay dimensions packaging model unit paper tape on reel acc. to iec 60286-3, type i blister tape on reel acc. to iec 60286-3, type ii quantity part number product desc. quantity part number product desc. crcw0201 180 mm/7" 10 000 ed et7 330 mm/13" 50 000 ee ef4 d10/crcw0402 180 mm/7" 10 000 ed et7 330 mm/13" 50 000 ee ef4 d11/crcw0603 180 mm/7" 5000 ea et1 285 mm/11.25" 10 000 eb et5 330 mm/13" 20 000 ec et6 d12/crcw0805 180 mm/7" 5000 ea et1 285 mm/11.25" 10 000 eb et5 330 mm/13" 20 000 ec et6 d25/crcw1206 180 mm/7" 5000 ea et1 285 mm/11.25" 10 000 eb et5 330 mm/13" 20 000 ec et6 crcw1210 180 mm/7" 5000 ea et1 285 mm/11.25" 10 000 eb et5 330 mm/13" 20 000 ec et6 crcw1218 180 mm/7" 4000 ek et9 crcw2010 180 mm/7" 4000 ef e02 crcw2512 180 mm/7" 2000 eg e67 4000 eh e82 size dimensions in millimeters solder pad dimensions in millimeters reflow soldering wave soldering inch metric l w h t1 t2 ab l ab l 0201 0525 0.6 0.05 0.3 0.05 0.23 0.05 0.15 0.05 0.15 + 0.05 - 0.10 0.28 0.43 0.23 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 0.1 0.4 0.6 0.5 0603 1608 1.55 + 0.10 - 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.3 0.2 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 2.0 + 0.20 - 0.10 1.25 0.15 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 3.2 + 0.10 - 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 0.9 1.7 2.0 1.1 1.7 2.3 1210 3225 3.2 0.2 2.5 0.2 0.55 0.05 0.45 0.2 0.4 0.2 0.9 2.5 2.0 1.1 2.5 2.2 1218 3246 3.2 + 0.10 - 0.20 4.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1.05 4.9 1.9 1.25 4.8 1.9 2010 5025 5.0 0.15 2.5 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2 1.2 3.2 5.2
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20035 114 revision: 02-dec-10 d/crcw e3 vishay lead (pb)-free thick film, rect angular chip resistors functional performance 1000 100 10 1 0.1 0.01 sin g le pulse pulse load max. (w) p 2512 121 8 2010 1210 1206 0 8 05 0603 0402 0201 10 -6 pulse duration i (s) t 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 100 maxim u m p u lse load, single p u lse; applica b le if p 0 and n < 1000 and ? ? max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation 1000 10 1 0.1 0.01 10 -6 continuous pulse maxim u m p u lse load, contin u o u s p u lses; applica b le if p p ( ? am b ) and ? ? max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration i (s) continuous pulse load max. (w) t p 100 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 100 2512 121 8 2010 1210 1206 0 8 05 0603 0402 0201 2000 200 0 10 - 6 10 - 5 10 - 4 10 - 3 10 - 2 10 - 1 110 pulse volta g e maxim u m p u lse v oltage, single and contin u o u s p u lses; applica b le if p p max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration i (s) 400 600 8 00 1000 1200 1400 1600 1 8 00 pulse volta g e max. (v) 2512 2010 1206/1210/121 8 0 8 05 0603 0402 t ?
document number: 20035 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 02-dec-10 115 d/crcw e3 lead (pb)-free thick film, rectangular chip resistors vishay - 55 - 25 0 25 50 75 100 125 155 175 120 100 8 0 60 40 20 0 70 deratin g ambient temperature in c fraction of rated dissipation in % 10 120 resistance value r in attenuation of 3rd harmonic a 3 in db non-linearity 100 8 0 40 60 20 0 100 1k 10k 100k 1m 10m 1206, 2010 0 8 05 0603 0402 100 1k 10k 100k 1m 10m 100 10 1 0.1 0.01 current noise a 1 in v/v current noise 2010 1206 0 8 05 0603 0402 resistance value r in
www.vishay.com for technical questions, contact: thickfilmchip@vishay.com document number: 20035 116 revision: 02-dec-10 d/crcw e3 vishay lead (pb)-free thick film, rect angular chip resistors test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( r ) size 0402 to 2512 size 0201 stability class 1 or better stability class 2 or better requirements permissible change ( r / r ) stability for product types: d/crcw e3 1 to 10 m 1 to 10 m 10 to 1 m 4.5 - resistance - 1 % 5 % 1 %; 5 % 4.7 - voltage proof u = 1.4 x u ins ; 60 s no flashover or breakdown 4.13 - short time overload u = 2.5 x 2 x u max. ; duration: acc. to style ( 0.25 % r + 0.05 ) ( 0.5 % r + 0.05 ) ( 1 % r + 0.05 ) 4.17.2 58 (td) solderability solder bath method; sn60pb40 non activated flux; (235 5) c (2 0.2) s good tinning ( 95 % covered) no visible damage solder bath method; sn96.5ag3cu0.5 non-activated flux; (245 5) c (3 0.3) s good tinning ( 95 % covered) no visible damage 4.8.4.2 - temperature coefficient (20/- 55/20) c and (20/125/20) c 100 ppm/k 200 ppm/k 100 ppm/k, 200 ppm/k 4.32 21 (uu 3 ) shear (adhesion) rr 1608 and smaller: 9 n rr 2012 and larger: 45 n no visible damage 4.33 21 (uu 1 ) substrate bending depth 2 mm; 3 times no visible damage, no open circuit in bent position (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) 4.19 14 (na) rapid change of temperature 30 min. at - 55 c; 30 min. at 125 c 5 cycles (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) (0.5 % r + 0.05 ) 1000 cycles (1 % r + 0.05 ) (1 % r + 0.05 ) (1 % r + 0.05 ) 4.23 - climatic sequence: - (1 % r + 0.05 ) (2 % r + 0.1 ) (2 % r + 0.1 ) 4.23.2 2 (ba) dry heat 125 c; 16 h 4.23.3 30 (db) damp heat, cyclic 55 c; 90 % rh; 24 h; 1 cycle 4.23.4 1 (aa) cold - 55 c; 2 h 4.23.5 13 (m) low air pressure 1 kpa; (25 10) c; 1 h 4.23.6 30 (db) damp heat, cyclic 55 c; 90 % rh; 24 h; 5 cycles 4.23.7 - dc load u = 4.25.1 - endurance at 70 c u = u max. ; 1.5 h on; 0.5 h off; 70 c; 1000 h (1 % r + 0.05 ) (2 % r + 0.1 ) (2 % r + 0.1 ) 70 c; 8000 h (2 % r + 0.1 ) (4 % r + 0.1 ) (4 % r + 0.1 ) p 70 x r p 70 x r p 70 x r
document number: 20035 for technical questions, contact: thickfilmchip@vishay.com www.vishay.com revision: 02-dec-10 117 d/crcw e3 lead (pb)-free thick film, rectangular chip resistors vishay all tests are carried out in accordan ce with the following specifications: ? en 60115-1, generic specification ? en 140400, sectional specification ? en 140401-802, detail specification ? iec 60068-2, environmental test procedures packaging of components is done in paper or blister tapes according to iec 60286-3. 4.18.2 58 (td) resistance to soldering heat solder bath method (260 5) c; (10 1) s (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) (1 % r + 0.05 ) 4.35 - flamability, needle flame test iec 60695-11-5; 10 s no burning after 30 s 4.24 78 (cab) damp heat, steady state (40 2) c; (93 3) % rh; 56 days (1 % r + 0.05 ) (2 % r + 0.1 ) 4.25.3 - endurance at upper category temperature 155 c, 1000 h (1 % r + 0.05 ) (2 % r + 0.1 ) (2 % r + 0.1 ) 4.40 - electrostatic discharge (human body model) iec 61340-3-1; 3 pos. + 3 neg. discharges; esd voltage acc. to size (1 % r + 0.05 ) 4.29 45 (xa) component solvent resistance isopropyl alcohol; 50 c; method 2 no visible damage 4.30 45 (xa) solvent resistance of marking isopropyl alcohol; 50 c; method 1, toothbrush marking legible, no visible damage 4.22 6 (fc) vibration, endurance by sweeping f = 10 hz to 2000 hz; x, y, z 1.5 mm; a 200 m/s 2 ; 10 sweeps per axis (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) (0.5 % r + 0.05 ) 4.37 - periodic electric overload u = 2 x u max. ; 0.1 s on; 2.5 s off; 1000 cycles (1 % r + 0.05 ) 4.27 - single pulse high voltage overload, 10 s/700 s ? = 10 x 2 x u max. ; 10 pulses (1 % r + 0.05 ) test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( r ) size 0402 to 2512 size 0201 stability class 1 or better stability class 2 or better requirements permissible change ( r / r ) stability for product types: d/crcw e3 1 to 10 m 1 to 10 m 10 to 1 m 15 x p 70 x r p 70 x r
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
